In this user’s manual, you should find all the information you need to operate your microTALK ® radio. If you require further assistance after reading this manual, Cobra Electronics offers the following customer assistance services: Automated Help Desk English only. 24 hours a day, 7 days a week 773-889-3087 (phone).
Page 3
All Hazards Radio Release belt clip and pull up. microTALK ® radios, chargers, products or component parts upon delivery to the Cobra Factory Service department, accompanied by proof of the date Hands-Free Press the battery door latch to • Operation (VOX) of first consumer purchase, such as a duplicated copy of a sales receipt.
Using Your Radio Operation Introduction Operation Customer Assistance Warranty Speaker/Microphone/Charge Jack Turning on Your microTALK ® Radio Mode/Power • • To attach a speaker/microphone: Mode/Power Press and hold the button until you Speaker/Microphone hear a series of audible tones indicating the radio /Charge Jack Open the speaker/microphone/charge tab on top of your microTALK...
Page 5
Using Your Radio Operation Introduction Operation Customer Assistance Warranty To Select a Channel To Illuminate Display Light/Max Range Channel Button • • Light/Max Range With the radio , select any of the Press and release the button to Channel Up 22 channels by pressing the illuminate the display for 10 seconds.
Page 6
Using Your Radio Operation Introduction Operation Customer Assistance Warranty microTALK ® Range CTCSS Privacy Codes • • CTCSS Your range will vary depending on terrain and conditions. (Continuous Tone Coded Squelch System) is an advanced tone coding system allowing you to select one of 38 privacy codes In flat, open country your radio will Maximum Range to reduce interference from other users on the channel.
Mode Functions Operation Introduction Operation Customer Assistance Warranty To Set VOX Sensitivity: NOAA* All Hazards Radio Channels Mode/Power • NOAA Mode/Power You can use your microTALK ® radio to listen to Press the button until the All Hazards Radio channels transmitting in your area. icon flashes and the current sensitivity level To listen to all hazards radio channels: is displayed.
Page 8
Mode Functions Mode Functions Operation Introduction Operation Customer Assistance Warranty During scanning (while receiving an incoming transmission), Privacy Code Scan you can choose from the following: • Privacy Codes Your microTALK ® radio can automatically scan the Talk Press and hold the button to communicate on (00 through 38) within one channel.
Page 9
Mode Functions Operation Introduction Operation Customer Assistance Warranty During scanning (while receiving an incoming transmission), Five Call Tone Settings • you can choose from the following: Call Tone Settings You can choose between five different Talk transmit a call alert. Press and hold the button to communicate on that To change a call tone setting:...
GMRS 462.6750 High Cobra may cause a violation of the technical regulations of part 95 of the FCC GMRS 462.7000 High rules, or violation of type acceptance requirements of part 2 of the rules.
Page 11
® radios, chargers, products or component parts upon delivery If your product should require factory service, please call Cobra first to the Cobra Factory Service department, accompanied by proof of the date Hands-Free • before sending your radio. This will ensure the fastest turn-around Operation (VOX) of first consumer purchase, such as a duplicated copy of a sales receipt.
Page 12
For more information or to order any of our products, please visit our website: www.cobra.com Nothing Comes Close to a Cobra ® English...
Need help?
Do you have a question about the microTALK PR 700 WX and is the answer not in the manual?
Questions and answers