High Altitude Mode; Network Setup - LG CF3DJS Owner's Manual

Function

High Altitude Mode

* High Altitude mode is used when the environment is higher than 3200 feet.
1. Press the MENU button. Then, move to OPTION with the
, , , buttons and press the
2. Press the , buttons to move to High Altitude and press
the OK button.
3. Press the , buttons to move to On and press the
button.
• Press the BACK button to exit the menu screen.

Network Setup

< NOTICE >
Use a standard LAN cable with this Projector. Cat5 or better with a RJ45 connector.
Many network connection problems during set up can often be fixed by re-setting the router or modem. After con-
necting the player to the home network, quickly power off and/or disconnect the power cable of the home network
router or cable modem. Then power on and/or connect the power cable again.
A 10 Base-T or 100 Base-TX LAN port is required for connection to this Projector. If your internet service does not
allow for such a connection, you will not be able to connect the Projector.
30
OK button.
OK
OPTION
Menu Language : English
Blank Image : Blue
Camera Calibration
Lamp Mode : Normal
High Altitude
Network Setting
Input Label
Power Sound : On
Move OK