Table of Contents
Advertisement
Connecting the Display
Before setting up the monitor, ensure that the power to the monitor, the computer
system, and other attached devices is turned off.
Connecting the stand base or Removing the stand base
1
.
Place the monitor with its front facing downward on a cushion or soft cloth.
2
.
Align the hooks on the stand base with the matching slots in the base of the monitor.
3
.
Insert the hooks into slots.
Warning:
The tape and locking pin may only be removed from those monitors
equipped with a standing base when the base is pulled up.
Otherwise, you may be injured by the protruding sections of the stand.
4.
Use a coin on the back of the stand base and turn the screw clockwise to
tighten.
5.
When you desire to disintegrate the monitor from the stand base, use a
coin to turn the screw counterclockwise.
Important
This illustration depicts the general model of connection. Your monitor may differ from
the items shown in the picture.
Once you connect the stand base, try not to disconnect it.
Do not carry the product upside down holding only the stand base. The product may
fall and get damaged or injure your foot.
Hook
Screw
A3
Slot
Advertisement
Table of Contents
