Connecting The Display; Connecting The Stand - LG N1742H User Manual

Connecting the Display

Before setting up the monitor, ensure that the power to the monitor, the computer
system, and other attached devices is turned off.

Connecting the stand

1
. Place the monitor with its front facing downward on a cushion or soft cloth.
2
. Assemble the Stand Base into the Stand Body.
Be sure don't pull out the Stop Pin and make the Stand Base direction as shown.
3
. Make the monitor stand , then pull out the Stop Pin.
W arning: The tape and locking pin m ay only be rem oved from those m onitors
equipped w ith a standing base w hen the base is pulled up. Otherw ise,
you m ay be injured by the protruding sections of the stand.
Stop Pin
Important
This illustration depicts the general model of connection. Your monitor may differ from
the items shown in the picture.
Do not carry the product upside down holding only the stand base. The product may
fall and get damaged or injure your foot.
Stand Body
Side Stop Pin
pull out the stop pin
Stand Base
A4 A4
FRONT
Stop Pin