Connecting the Display
4.
Attach the monitor to the Stand Base by turning the screw to the right.
5.
Lift and turn the monitor to face towards the front after the connection is
made to the female part of the cable you're attaching.
6.
Take the screw out by turning to the left to separate the monitor and Stand
Base.
WARNING
The tape and locking pin may only be removed from those monitors equipped with a
standing base when the base is pulled up. Otherwise, you may be injured by the protruding
sections of the stand.
Positioning your display
After installation, adjust the angle as shown below.
1.
Adjust the position of the panel in various ways for maximum comfort.
Tilt Range : -6˚~22˚
-6
Screw
When adjusting the angle of the
22
screen, do not put your finger(s) in
between the head of the monitor
and the stand body. You can hurt
your finger(s).
6
: Turn the screw by using the screw handle.