LG FLATRON W2442PA Service Manual

LG FLATRON W2442PA Service Manual

Color monitor
Hide thumbs Also See for FLATRON W2442PA:

Advertisement

COLOR MONITOR

SERVICE MANUAL

CHASSIS NO. : LM89A
MODEL:
(
) **Same model for Service
CAUTION
BEFORE SERVICING THE UNIT,
READ THE SAFETY PRECAUTIONS IN THIS MANUAL.
Website:http://biz.LGservice.com
E-mail:http://www.LGEservice.com/techsup.html
W2442PA(W2442PA-BFT.A***P*)
Internal Use Only

Advertisement

Table of Contents
loading

Summary of Contents for LG FLATRON W2442PA

  • Page 1: Color Monitor

    Internal Use Only Website:http://biz.LGservice.com E-mail:http://www.LGEservice.com/techsup.html COLOR MONITOR SERVICE MANUAL CHASSIS NO. : LM89A MODEL: W2442PA(W2442PA-BFT.A***P*) ) **Same model for Service CAUTION BEFORE SERVICING THE UNIT, READ THE SAFETY PRECAUTIONS IN THIS MANUAL.
  • Page 2: Table Of Contents

    Vertical : 56 ~ 75Hz : 6.2 kg (13.78 lbs) Net. Weight : 7.42 kg (16.49 lbs) Gross Weight Copyright 2007 LG Electronics. Inc. All right reserved. - 2 - LGE Internal Use Only Only for training and service purposes...
  • Page 3: Signal Connector Pin Assignment

    +5V Power Ground (return for +5V, H. Sync. and V. Sync.) T. M. D. S. (Transition Minimized Differential Signaling) Copyright 2007 LG Electronics. Inc. All right reserved. - 3 - LGE Internal Use Only Only for training and service purposes...
  • Page 4: Precautions

    CAUTION Please use only a plastic screwdriver to protect yourself from shock hazard during service operation. Copyright 2007 LG Electronics. Inc. All right reserved. - 4 - LGE Internal Use Only Only for training and service purposes...
  • Page 5: Copyright 2007 Lg Electronics. Inc. All Right Reserved

    8. Always connect the test receiver ground lead to the receiver chassis ground before connecting the test receiver positive lead. Always remove the test receiver ground lead last. Copyright 2007 LG Electronics. Inc. All right reserved. - 5 - LGE Internal Use Only Only for training and service purposes...
  • Page 6: Only For Training And Service Purposes

    IC. circuit board to prevent excessive component temperatures. Copyright 2007 LG Electronics. Inc. All right reserved. - 6 - LGE Internal Use Only Only for training and service purposes...
  • Page 7: Copyright 2007 Lg Electronics. Inc. All Right Reserved

    Solder the overlapped area and clip off any excess jumper wire. Copyright 2007 LG Electronics. Inc. All right reserved. - 7 - LGE Internal Use Only Only for training and service purposes...
  • Page 8: Timing Chart

    H(Pixels) 65.290 2240 1680 1680x1050 146.25 V(Lines) 59.954 1089 1050 67.50 2200 1920 1920x1080 H(Pixels) 148.50 V(Lines) 1125 1080 Copyright 2007 LG Electronics. Inc. All right reserved. - 8 - LGE Internal Use Only Only for training and service purposes...
  • Page 9: Disassembly

    1. Pull the front cover upward. Disassemble back cover. 2. Then, let the all latches are separated. 3. Put the front face down. - 9 - Copyright 2007 LG Electronics. Inc. All right reserved. LGE Internal Use Only Only for training and service purposes...
  • Page 10: Copyright 2007 Lg Electronics. Inc. All Right Reserved

    BLOCK DIAGRAM Copyright 2007 LG Electronics. Inc. All right reserved. - 10 - LGE Internal Use Only Only for training and service purposes...
  • Page 11: Description Of Block Diagram

    The Micom distinguishes polarity and frequency of the H/V sync are supplied from signal cable. The controlled data of each modes is stored in EEPROM. Copyright 2007 LG Electronics. Inc. All right reserved. - 11 - LGE Internal Use Only...
  • Page 12: Copyright 2007 Lg Electronics. Inc. All Right Reserved

    This part function is to collect the any change from the DC output and feed back to the primary through photo transistor. Copyright 2007 LG Electronics. Inc. All right reserved. - 12 - LGE Internal Use Only Only for training and service purposes...
  • Page 13: Adjustment

    Click “ Write” button c) Remove all default number d) Add 300-3FF e) Click Start button. f) Click Exit button. Copyright 2007 LG Electronics. Inc. All right reserved. - 13 - LGE Internal Use Only Only for training and service purposes...
  • Page 14: Service Osd

    (110V/220V) 74LS06 Power LED 4.7K 74LS06 ST Switch V-Sync On/Off Switch (Switch must be ON.) Figure 1. Cable Connection Copyright 2007 LG Electronics. Inc. All right reserved. - 14 - LGE Internal Use Only Only for training and service purposes...
  • Page 15: Troubleshooting Guide

    IS IC402 PIN3 IC401(1.8V) LINE IC401 PIN3 CHECK IC101 PIN25 CHECK CRYSTAL(X101) PULSE CHECK IC101 Waveforms IC4 02-#2 P402-#5,6 IC401 IC101 Copyright 2007 LG Electronics. Inc. All right reserved. - 15 - LGE Internal Use Only Only for training and service purposes...
  • Page 16 POWER BOARD (LIPS) TO THE LAMP WIRE OF THE LCD MODULE REPLACE LCD MODULE Waveforms P402 -#10 P402-#5,6 LAMP CURRENT Copyright 2007 LG Electronics. Inc. All right reserved. - 16 - LGE Internal Use Only Only for training and service purposes...
  • Page 17 PIN66(V-SYNC). FROM D-SUB TO IC101 IS PULSE APPEARED AT SIGNAL PINS? TROUBLE IN CABLE OR LCD MODULE Waveforms IC101 Copyright 2007 LG Electronics. Inc. All right reserved. - 17 - LGE Internal Use Only Only for training and service purposes...
  • Page 18 INTO DPM MODE APPEARED? CHECK IC101 PIN65,66 CHECK H/V SYNC LINE SYNC PULSE TROUBLE IN IC101 Waveforms 1 H-SYNC 2 V-SYNC Copyright 2007 LG Electronics. Inc. All right reserved. - 18 - LGE Internal Use Only Only for training and service purposes...
  • Page 19: Wiring Diagram

    WIRING DIAGRAM 66319100109G 66319000225 6602T120005E Copyright 2007 LG Electronics. Inc. All right reserved. - 19 - LGE Internal Use Only Only for training and service purposes...
  • Page 20: Exploded View

    EXPLODED VIEW - 20 -...
  • Page 27 SEP. 2008 P/NO : MFL32179285 Printed in China...

Table of Contents