D-Link DSL-2642B User Manual page 54

Wireless adsl router

Hide thumbs Also See for DSL-2642B:

Table of Contents

Section 3 – Configuration

Enter the information in the section. Explanations of parameters are

described below. Click the Save/Apply button to add the entry in the

Active Outbound IP Filtering table.

Filters

Description

Parameter

Filter Name

Enter a name for the new filter.

Protocol

Select the transport protocol (Any, TCP/UDP, TCP, UDP or ICMP) that will be used for the filter rule.

Select IP Range

Select either IP address or Netmask to show different items.

Source IP Address

Source IP Address & Source

Subnet Mask

Source Port

The Source Port is the TCP/UDP port on either the LAN or WAN depending on if you are configuring an Outbound or Inbound

Filter rule.

Destination Port

The Destination Port is the TCP/UDP port on either the LAN or WAN depending on if you are configuring an Outbound or

Inbound Filter rule.

D-Link DSL-2642B User Manual

Enter the start and end IP address for the range of IP addresses which you are creating the

filter rule.

This is the IP address and their associated subnets for which you are creating the filter rule.

Table of Contents