Table of Contents
Advertisement
Declaration of conformance to
product standards
We declare that our products meet the applicable
European Directives, Decisions and Regulations and
the requirements listed in the standards referenced.
Packaging and the Environment
Packaging materials protect your machine from
damage that may occur during transportation. The
packaging materials are environmentally friendly as
they are recyclable. The use of recycled material
reduces raw material consumption and therefore
decreases waste production.
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
39
Product support
Disposal
The symbol on the product or on its
packaging indicates that this product may not
be treated as household waste. Instead, it
shall be handed over to the applicable
collection point for the recycling of electrical
and electronic equipment. By ensuring this
product is disposed of correctly, you will help
prevent potential negative consequences for
the environment and human health, which
could otherwise be caused by inappropriate
waste handling of this product. For more
detailed information about recycling of this
product, please contact your local city office,
your household waste disposal service or the
shop where the product was purchased.
Recycling
Some machine components and packaging consist
of recyclable materials.
Plastics are marked with the international
abbreviations:(>PE<, >PP<, etc. )
The cardboard parts consist of recycled paper. They
can be put into waste paper containers for recycling.
Material unsuitable for domestic waste must be
disposed of at recycling centres.
Contact a relevant recycling centre to dispose of
such materials.
Advertisement
Table of Contents
