Samsung ML-2950ND User Manual page 42

Basic printing
Setting eco mode on the control panel
• The settings set from the machine's driver override the
settings on the control panel.
• If you set the eco mode on with a password from the
SyncThru™ Web Service (Settings tab > Machine Settings
> System > Eco > Settings), the Onforce message
appears. You have to enter the password to change the
eco mode status.
Eco
1
Press (Eco) button on the control panel.
When the LED on the button lights up, the Eco mode is
enabled.
Setting eco mode on the driver
Open the Eco tab to set eco mode. When you see the eco image
( ), that means the eco mode is currently enabled.
► Eco options
• Printer Default: Follows the settings set from the machine's
control panel.
• None: Disables eco mode.
• Eco Printing: Enables eco mode. Activate the various eco items
you want to use.
► Result simulator
Result Simulator shows the results of reduced emission of carbon
dioxide, used electricity, and the amount of saved paper in
accordance with the settings you selected.
• The results are calculated on the basis that the total number of
printed paper is one hundred without a blank page when the eco
mode is disabled.
• Refer to the calculation coefficient about CO2, energy, and paper
from IEA, the index of Ministry of Internal Affairs and
Communication of Japan and www.remanufacturing.org.uk.
Each model has a different index.
• The power consumption in printing mode refers to the average
printing power consumption of this machine.
• The actual saved or reduced amount may differ depending on
the operating system used, computing performance, application
software, connection method, media type, media size, job
complexity, etc.
2. Menu overview and basic setup 42