Hans Grohe Axor 042200 Series Installation Instructions / Warranty page 6

1.

2.
English
Seal the wall around the
plaster shield with waterproof
sealant (1).
Failure to seal the wall
can lead to possible water
damage.
Remove the flush insert screw using a 5 mm Allen
wrench (2).
Remove the flush insert and seals.
Insert the function block.
Install and tighten the function block screws using
a 4 mm Allen wrench.
Measure the distance from the front of the plaster
shield to one of the screw-in flanges ("X").