Removing The Wire Shelf - Zephyr BWN24C02AG Use, Care And Installation Manual

►
To prevent damaging the door or door gasket, make sure the door is open at least 90-degrees
when pulling shelves out of the rail compartment.
►
The door opens to a maximum of 135 degrees with a door stop on the bottom hinge preventing the
door from opening further.

Removing the Wire Shelf

BWN24C02AG Use, Care, and Installation Guide
Installation Instructions
1. Open the door completely.
2. Remove all of the contents loaded on the shelf,
if applicable.
3. Pull the shelf outward slightly, gently lift the
back, and slide it out to remove the shelf.
19