Product Operating Buttons - Samsung SyncMaster 2443DW User Manual

3-4

Product Operating Buttons

Product Operating Buttons
Touch them lightly with your fingers to use them.
ICON
MENU
▲/▼
Using the product
Press this button to view the On Screen Display (OSD).
This button is also used to exit the OSD or to return to a higher-level OSD menu
* OSD Adjustment Lock
This function locks the OSD in order to maintain the current settings or to prevent the settings
from being changed by another person
On: If you press and hold the MENU button down for 5 seconds, the OSD Adjustment Lock
function is activated.
Off: If you press and hold the MENU button down for 5 seconds again, the OSD Adjustment
Lock function is disabled.
Even if the OSD Adjustment Lock function is activated, users can adjust the brightness
and contrast and can set up the adjustment function assigned to the [ ].
Use these buttons to navigate the menu or to adjust a value in the OSD.
Use this button to control the brightness of the screen.
Users can set the <Customized Key> to one of the following functions. If the user presses the
Customized Key[ ] after setting it, the configured function will be performed.
• <MagicBright> - <MagicAngle> - <MagicEco> - <Image Size>
You can set the function of the <Customized Key> by selecting <SETUP&RESET> ->
<Customized Key> in the OSD.
Use this button to select a function.
If you press the [
DP) is switched. When the input signal is switched by pressing [
product is turned on, a message displaying the selected input signal appears at the top
left of the screen.
• To select Digital mode, you have to connect the product and the PC with the DVI
cable.
• To select DP mode, you have to connect the product and the PC with the DP cable.
DESCRIPTION
] button when there is no OSD, the input signal (Analog/Digital/
] button or the
3-4