Download Print this page

Samsung SyncMaster 2343BW Quick Start Manual

Samsung lcd monitor quick start guide.
Hide thumbs

Advertisement

LCD MONITOR

quick start guide
2343BW 2343BWX


Advertisement

   Related Manuals for Samsung SyncMaster 2343BW

   Summary of Contents for Samsung SyncMaster 2343BW

  • Page 1: Lcd Monitor

    LCD MONITOR quick start guide 2343BW 2343BWX...

  • Page 2

    Introduction Package Contents Note Please make sure the following items are included with your monitor. If any items are missing, contact your dealer. Contact a local dealer to buy optional items. Unpacking Type 1 Monitor & Simple stand Type 2 Monitor &...

  • Page 3

    Type4 Monitor & HAS stand Manuals Quick Setup Guide (Not available in all loca- Cables D-Sub Cable Others Cleaning Cloth Cable holding ring(Simple Sold separately USB Cable Note This is only provided for highly polished black products as a product feature. Warranty Card User's Guide tions)

  • Page 4: Your Monitor

    Your Monitor Initial Settings Select the language using the up or down key. The displayed content will disappear after 40 seconds. Turn the Power button off and on. It will be displayed again. It can be displayed up to three (3) times. Make sure to adjust the resolution of your PC before reaching the maximum count.

  • Page 5

    You can customize key assignment for the Custom button according to your preferences. Note You can configure the customized key for a required function via Setup > Customized Key. Brightness button [ ] When OSD is not on the screen, push the button to adjust brightness. >>...

  • Page 6

    simple stand POWER port Connect the power cord for your monitor to the POWER port on the back of the product. DVI IN port Connect the DVI Cable to the DVI IN port on the back of your monitor. RGB IN port Connect the D-sub cable to the 15-pin, RGB IN port on the back of your mon- itor.

  • Page 7

    Introduction Cable holding ring • Fix the cables using the holding ring, as shown in the figure.

  • Page 8: Connecting Cables

    Connections Connecting Cables Connect the power cord for your monitor to the power port on the back of the monitor. Plug the power cord for the monitor into a nearby outlet. Use a connection appropriate for your computer. Using the D-sub (Analog) connector on the video card. •...

  • Page 9

    High speed Data Rate 480 Mbps Power Consump- 2.5 W tion (Max., each port) Connect the UP port of the monitor and the USB port of the computer with the USB cable. Note To use DOWN port, you have to connect the UP (Upstream Cable) to the PC. Make sure to use the USB cable supplied with this monitor to connect the monitor's UP port and your computer's USB port.

  • Page 10: Using The Stand

    Note When connecting a device to the using a cable appropriate to the device. (For the purchase of the cable and external devices, ask the service center of the cor- responding product.) The company is not liable for problems or damages to an external device caused by using an unauthorized cable for the connection.

  • Page 11: Attaching A Base

    Samsung is not liable for these kinds of accidents. • Samsung is not liable for product damage or personal injury when a non- VESA or non-specified wall mount is used or the consumer fails to follow the product installation instructions.

  • Page 12: Troubleshooting

    Troubleshooting Self-Test Feature Check Note Your monitor provides a self test feature that allows you to check whether your monitor is functioning properly. Self-Test Feature Check Turn off both your computer and the monitor. Unplug the video cable from the back of the computer. Turn on the monitor.

  • Page 13: Useful Tips

    Useful Tips A monitor recreates visual signals received from the computer. Therefore, if there is a problem with the computer or the video card, this can cause the monitor to become blank, have poor coloring, become noisy, and video mode not supported, etc. In this case, first check the source of the problem, and then contact the Service Center or your dealer.

  • Page 14

    You can see this message when the signal from the video card exceeds the maximum resolution and frequency that the monitor can handle properly. Adjust the maximum resolution and frequency that the monitor can handle properly. If the display exceeds SXGA or 75 Hz, a "Not Optimum Mode", "Recommended Mode 2048 x 1152 60 Hz"...

  • Page 15

    Have you adjusted the resolution or frequency to the monitor? Adjust the resolution and frequency at the video card. (Refer to the Preset Timing Modes). The screen can be unbalanced due to the cycle of the video card signals. Readjust Position by referring to the OSD.

  • Page 16

    MagicTune™ is an additional software for the monitor. Some graphic cards may not support your monitor. When you have a problem with the graphic card, visit our website to check the compatible graphic card list provided. http://www.samsung.com/monitor/magictune MagicTune™ doesn't work properly. Have you changed your PC or video graphic card? Download the latest program.

  • Page 17

    Windows XP: Set the resolution in the Control Panel → Appearance and Themes → Display → Set- tings. Windows ME/2000: Set the resolution in the Control Panel → Display → Settings. * Contact the video card manufacturer for details. How can I set the Power Saving function? Windows XP: Set the resolution in the Control Panel →...

Comments to this Manuals

Symbols: 0
Latest comments: