Velleman VDLNS4 Manual

1. Introduction

To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm the environment.
Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialised company for recycling.
This device should be returned to your distributor or to a local recycling service.
Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you very much for buying this neon sign. Please read the manual thoroughly before bringing this device into
service.
If the device was damaged in transit, don't install or use it and contact your dealer.
Please check your set to see if the following items are included:
• 1 neon sign
• 1 plug-in transformer 12VDC
• 1 tube of glue
• this manual

2. Instructions

Unpack everything carefully.
Put some glue into the groove for the neon sign and put the neon sing into the groove. Wait a couple of minutes.
Insert the AC/DC adapter into the power input at the back of the base. Switch the power button to 'ON' and the neon
sign will start glowing.
The VDLNS4 is suited for indoor use only.

3. Technical Specifications

Neon sign size
Neon sign weight
Adapter
The information in this manual is subject to change without prior notice.
VDLNS4
VDLNS4 – NEON SIGN "FLAMINGO"
100 x 380mm
380g
4.5VDC / 800mA (incl.)
VELLEMAN