SNOWJOE Sunjoe iON8PS2 Operator's Manual
SNOWJOE Sunjoe iON8PS2 Operator's Manual

SNOWJOE Sunjoe iON8PS2 Operator's Manual

Cordless pole chain saw 8-inch 40-volt max

Advertisement

Quick Links

OPERATOR'S MANUAL
A Division of Snow Joe
, LLC
®
IMPORTANT!
Safety Instructions
All Operators Must Read These
Instructions Before Use
Always follow these safety guidelines. Failure to do so may
result in serious bodily injury or death.
m
DANGER!
This indicates a hazardous situation, which,
if not followed, will result in serious injury or death.
m
WARNING!
This indicates a hazardous situation, which,
if not avoided, could result in serious injury or death.
m
CAUTION!
This indicates a hazardous situation, which,
if not avoided, could result in minor or moderate injury.
General Safety
m
WARNING!
When using cordless yard tools, basic
safety precautions should always be followed to reduce the
risk of fire, electric shock and personal injury, including the
following:
1. Keep guards in place – Protective guards should be
checked periodically to ensure they are properly fitted and
in correct working order.
2. Keep work area clean and well-lit – Clear work area of
branches and limbs after each cutting session. Cluttered
areas invite accidents.
3. Do not use in dangerous environments – Do not use
power tools in damp or wet locations.
4. Do not use the pole chain saw in the rain.
5. Keep bystanders and children away – All bystanders,
including children and pets, should be kept a safe
distance away from the work area.
6. Do not force the tool – It will do the job effectively and
safely if it is used at the rate for which it was designed.
7. Use the right tool – Do not force the tool or any
attachment on the tool to do a job for which they were
not designed.
8. Wear proper apparel – Do not wear loose articles of
clothing or jewelry since such items may get caught
in moving parts. Use of heavy-duty rubber gloves,
substantial non-skid footware and close-fitting clothing is
recommended when working outdoors with power tools.
© 2019 by Snow Joe
, LLC
®
All rights reserved. Original instructions.
CORDLESS POLE CHAIN SAW
R
8-INCH | 40-VOLT MAX*
Model iON8PS2
9. Wear protective hair coverings to contain long hair.
10. Always wear safety glasses and ear defenders to
provide eye and ear protection – Everyday eyeglasses
only have impact resistant lenses and do not provide the
same protection as safety glasses.
11. Wear face or dust masks – If the cutting operation is
dusty, the use of a face or dust mask specially designed
to filter out miscoscopic particles is recommended.
12. Do not overreach – Keep proper footing and balance
at all times.
13. Maintain tools with care – Keep tools sharp and clean
for best and safest performance. Follow instructions for
lubricating and changing accessories.
14. Disconnect tool – Turn off the power switch and remove
the battery when it is not in use, before servicing, when
transporting or when changing the chain or
other accessories.
15. Reduce the risk of unintentional starting – Make sure
the safety switch and the trigger switch are in the OFF
position before inserting the battery in the unit. Do not
carry the pole chain saw with the safety switch and the
trigger switch engaged.
16. Use recommended accessories – Consult the owner's
manual for recommended accessories. The use of
improper accessories may cause risk of injury.
17. Check for damaged parts – Before each use, repair or
replace any guard or part that is damaged. In addition,
check for alignment of moving parts, binding of moving
parts, breakage of parts and any other conditions that
may affect the tool's operation.
18. Never leave tool unattended while it is running – Turn
the power OFF by removing the battery from the unit.
Do not leave the saw until the cutting bar comes to a
complete stop.
19. Avoid unintentional starting – Do not carry the pole
chain saw with your finger on the switch.
20. Do not grasp the exposed cutting blade or cutting
edges when picking up or holding the saw – Be sure to
encase the cutting bar in its protective sheath when not
in use.
21. Stay alert – Watch what you are doing. Use common
sense. Do not operate the pole chain saw when you
are tired.
22. Store idle tool indoors – When not in use, appliances
should be stored indoors in a dry and high or locked-up
place out of the reach of children.
1
Form No. SJ-iON8PS2-880E-MR3

Advertisement

Table of Contents
loading

Summary of Contents for SNOWJOE Sunjoe iON8PS2

  • Page 1 CORDLESS POLE CHAIN SAW 8-INCH | 40-VOLT MAX* OPERATOR’S MANUAL Model iON8PS2 A Division of Snow Joe , LLC ® Form No. SJ-iON8PS2-880E-MR3 IMPORTANT! 9. Wear protective hair coverings to contain long hair. 10. Always wear safety glasses and ear defenders to Safety Instructions provide eye and ear protection –...
  • Page 2: Before Using

    Specific Safety Rules For When using Pole Chain Saws 1. Use the pole chain saw only in daylight or good artificial light. 2. The use of power equipment can be regulated. Remember WARNING! SHOCK HAZARD! To protect yourself from to comply with legal regulations which may differ from one electrocution, do not operate the pole chain saw within location to another.
  • Page 3: After Using

    After using • Use extreme caution when re-entering a previous cut. • Use the low-kickback chain and guide bar supplied with 1. Always remove the battery from the tool before performing this pole chain saw. Only use genuine Snow Joe ®...
  • Page 4: Battery + Charger Safety Instructions

    ® ® battery pack in rain, snow or in damp or wet locations. at 1-866-SNOWJOE (1-866-766-9563). Do not use the battery pack or charger in the presence of • Battery chemicals cause serious burns – Never let a explosive atmospheres (gaseous fumes, dust or flammable damaged battery pack contact the skin, eyes or mouth.
  • Page 5 ® ® ® process. The battery pack must be replaced at the latest customer service center at 1-866-SNOWJOE when its capacity falls to just 80% of its capacity when (1-866-766-9563). new. Weakened cells in an aged battery pack are no 3.
  • Page 6 Protection from environmental infuences 1. Wear suitable work clothes. Wear safety goggles. 2. Protect your cordless tool and the battery charger from moisture and rain. Moisture and rain can cause dangerous cell damage. 3. Do not use the cordless tool or the battery charger near vapors and flammable liquids.
  • Page 7: Safety Symbols

    Safety Symbols The following table depicts and describes safety symbols that may appear on this product. Read, understand and follow all instructions on the machine before attempting to assemble and operate. Symbols Descriptions Symbols Descriptions READ THE OPERATOR'S MANUAL(S) – Read, understand and follow all Keep bystanders and children instructions in the user...
  • Page 8: Technical Data

    Know Your Cordless Pole Chain Saw Read the owner’s manual and safety instructions carefully before operating the cordless pole chain saw. Compare the illustration below to the pole chain saw in order to familiarize yourself with the location of the various controls and adjustments. Save this manual for future reference.
  • Page 9: Carton Contents

    ® ® ® • 8 in. (20.3 cm) chain service center at 1-866-SNOWJOE (1-866-766-9563). • 8 in. (20.3 cm) guide bar WARNING! When installing/replacing the guide bar and • Dual-tipped hex key wrench/blade screwdriver chain, use only identical replacement parts. Make sure the •...
  • Page 10 3. Remove the cutting bar and chain from the mounting surface (Fig. 3). Fig. 5 Fig. 3 Cutting bar Chain Fig. 6 4. Remove the old chain from the bar. 5. Lay out the new saw chain in a loop and straighten any kinks.
  • Page 11: Preparing To Work

    8. Adjust the chain tension as needed by adjusting the chain tensioner screw with the supplied flat-tip blade Fig. 10 screwdriver. Make sure to align the chain tensioner screw with the pin hole (Fig. 8). Fig. 8 Chain tensioner Chain tensioner screw Blade 11.
  • Page 12 NOTE: Your cordless pole chain saw is equipped with an the saw and be whipped toward you, pull you off balance or automatic oil pump for bar and chain oiling. You must add spring back. bar and chain oil or your pole chain saw will not function Do not use the pole chain saw to cut vines and/or small properly.
  • Page 13: Battery Pack Operation

    Battery Pack Operation • Use the battery charge indicator lights to determine when to charge your iONMAX iBAT40 lithium-ion battery pack. The equipment is powered by a lithium-ion battery. The battery • You can "top-off" your battery pack's charge before starting pack is completely closed and maintenance free.
  • Page 14: Charging A Hot Or Cold Battery Pack

    If there is only a red blinking light, this indicates that Lithium-Ion Charging Status something is wrong with the battery. Contact Snow Joe ® Battery Pack Red Charger Charging Sun Joe customer service at 1-866-SNOWJOE ® Temperature Indicator Light Status (1-866-766-9563). Too hot Flashing...
  • Page 15 2. Take off the bar sheath. Fig. 21 3. Make sure the guide bar is not touching the ground or any other object. 4. Hold the pole chain saw firmly with both hands. 5. To turn the tool ON, push and hold the safety lock switch on the top of the handle grip with your thumb and then squeeze the trigger switch with your fingers.
  • Page 16: Cutting Tips

    Adjusting the Multi-Angle Head Fig. 26 The pole chain saw head can be rotated for different cutting angles: 0º or 30º. 1. Turn off the switch. 2. Press the multi-angle head adjustment button to loosen the head (Fig. 24). Fig. 24 60º...
  • Page 17: Maintenance

    ® ® If the Saw Becomes Pinched or Trapped at 1-866-SNOWJOE (1-866-766-9563) for all maintenance operations not foreseen in this manual. Any operation 1. Wait for the blade to stop, wait five minutes for the saw to performed in an unauthorized service center or by unqualified cool, remove the battery and wear gloves to protect your personnel will completely invalidate the warranty.
  • Page 18: Motor Cooling

    Snow Joe ® ® ® Sun Joe customer service center at 1-866-SNOWJOE ® To avoid overheating and damage to the motor, always keep (1-866-766-9563). the cooling air vents clean and free of sawdust and debris. Sharpening is necessary when: Chain Tension •...
  • Page 19: Chain Sprocket

    ® iON8PS2 cordless pole chain saw by ordering online at sunjoe.com or, to order by phone, contact Snow Joe ® Sun Joe customer service at 1-866-SNOWJOE ® (1-866-766-9563). Chain Sprocket Regularly check the condition of the sprocket and replace it when wear exceeds 0.5 mm (Fig.
  • Page 20: Battery Caution + Disposal Information

    Snow Joe + Sun Joe customer service ® ® service or maintenance, please call 1-866-SNOWJOE center at 1-866-SNOWJOE (1-866-766-9563). (1-866-766-9563) for assistance. Cleaning Model + Serial Numbers Use only mild soap and a damp cloth to clean the pole chain When contacting the company, reordering parts or arranging saw.
  • Page 21: Federal Communications Commission (Fcc)

    Troubleshooting Troubleshooting Tips Most difficulties are easy to fix. Consult the troubleshooting table for common problems and their solutions. If you continue to experience problems or need repairs beyond these minor adjustments, please call 1-866-SNOWJOE (1-866-766-9563) for assistance. WARNING! Always remove the battery before performing any adjustments, maintenance or repairs to your cordless pole chain saw.
  • Page 22: Optional Accessories

    NOTE: Accessories are subject to change without any obligation on the part of Snow Joe + Sun Joe . Accessories ® ® can be ordered online at sunjoe.com or via phone by contacting the Snow Joe + Sun Joe customer service center ® ® at 1-866-SNOWJOE (1-866-766-9563).
  • Page 23 WHO CAN SEEK WARRANTY COVERAGE? Wearing parts like belts, augers, chains and tines are not covered under this warranty, and can be purchased at snowjoe.com or This Warranty is extended by Snow Joe + Sun Joe to the owner ®...
  • Page 24 sunjoe.com...

Table of Contents