The laws of the State of California shall govern this warranty. In the event the defect is determined to be within the terms of this warranty then ROS agrees to repair and/or replace (at ROS' discretion) the product or defective portion at no charge to the Purchaser.
CUSTOMER ASSISTANCE ROS, Inc. uses a worldwide network of stocking distributors and representatives who are familiar with our products and are able to provide assistance during installation and/or operation of these products. If you have any questions or problems with this product that are not covered by this manual or instruction, please contact our agent in your area, or contact us directly by phone or FAX or e-mail.
The C460 is rated to operate in both air and water with depths to 6000MSW (8700 psi). The C460 is a standard definition black and white fixed focal length camera, with EIA and CCIR versions available.
3 PRODUCT SPECIFICATIONS Electronics Resolution 570 TVL Minimum Scene Illumination .000005 Lux 1/3” CCD II Sensor Type Power Input 12-36 VDC Video Output Composite, 1.0 V p-p into 75 ohm Optical Focus Control Fixed, 6.0 in (152mm) to infinity Field of View in Air 77°...
OFF, simply remove power with the source. 6 MAINTENANCE The C460 is intended to be maintenance free. The C460 is purged with dry Nitrogen to eliminate moisture which prevents problems with corrosion and condensation. Though the C460 is constructed of highly corrosion resistant materials, corrosion of all components can further be minimized by applying a fresh water rinse after being immersed in saltwater.
1. If possible, replace the interconnecting cable and check functionality. 2. If possible, replace the C460 camera and check functionality. 3. Verify that there is voltage from the source using a multi-meter. The system should function over a range of 10 to 36 VDC.
Need help?
Do you have a question about the C460 and is the answer not in the manual?
Questions and answers