Operation
Pairing
After installation, the camera & monitor need to be paired.
This only needs to be done once.
Pairing procedure
Ensure both the camera and monitor have power supplied.
The vehicle may need to be running
1. Bring the monitor to within close proximity for pairing.
2. Press the Power button to turn on the monitor.
3. Press the Menu button, this will bring up 4 icons on the screen.
4. Use the Up & Down buttons to scroll across to the Pair icon.
5. Press the Power/ Confirm button to start pairing. A Pair icon will be displayed.
6. Press the small button on the underside of the camera for 2 seconds.
7. An OK Pair icon will be displayed once pairing is complete.
12
Menu/ Return
Menu
Up
Up
Power/ Confirm
Down
Down
Line
Line