Advertisement
2.
Attached the Wind Shield (F) to the Steel Stand (A) by
using Bolt (1) and Nut (2).
Tighten the bolt & nut if loosen.
3.
Unscrew the pre-assembled nut from the threaded pin
of Burner (B). Attached the burner on the burner
support of wind shield (F). Then tighten the burner with
unscrewed nut onto bolt of burner.
4.
Attach the Regulator Hose Assembly (C) to Burner (B).
5.
Press and fix the U-shaped end of hook into the slot on
regulator.
6.
When transporting or storing LP cooker without tank
attached, hook regulator onto burner or cooker stand to
prevent damage to regulator.
TF1038-014531 English
1
A
1
B
2
B
A
C
11
F
6
G
B
2
B
2
B
2
05112018
Advertisement
