Fault
All other error codes.
The appliance is not work-
ing.
The programme does not
start.
The door cannot be opened. – –– is activated.
Cause
Malfunction
The mains plug of the power
cord is not plugged in.
The circuit breaker is faulty.
There has been a power cut.
You have not pressed Start/
Nachlegen.
Door is not closed.
Childproof lock is activated.
Fertig in is activated.
Laundry is caught in the
door.
The temperature is too high.
Water level is too high.
Power failure.
Troubleshooting en
Troubleshooting
Call the after-sales service.
▶
→ "Customer Service", Page 53
Connect the appliance to the power
▶
supply.
Check the circuit breaker in the
▶
fuse box.
Check whether the lighting in your
▶
kitchen or other appliances are
working.
Press Start/Nachlegen.
▶
Close the door.
1.
Press Start/Nachlegen to start the
2.
programme.
→ "Deactivating the childproof
▶
lock", Page 35
Check whether Fertig in is activ-
▶
ated.
→ "Buttons", Page 23
Open the door again.
1.
Remove any trapped laundry.
2.
Close the door.
3.
Press Start/Nachlegen to start the
4.
programme.
Continue the programme by select-
▶
ing Schleudern or Abpumpen and
pressing Start/Nachlegen.
→ "Resuming the programme when
the programme status is Rinse
Hold", Page 34
Wait until the temperature has
▶
dropped.
→ "Cancelling the programme",
▶
Page 34
Start the Abpumpen programme.
▶
Open the door using the emergency
▶
release.
→ "Emergency release", Page 51
45