Philips HD8836/43 Operating Instructions Manual page 21

Table of Contents

Advertisement

• The icon indicates that the tank must
be rinsed and fi lled.
Rinse the water tank thoroughly
and fi ll it again with fresh drinking
Red
water up to the MAX level.
• Empty the container used to collect the
liquid dispensed by the machine and
place it back under the steam wand.
• After inserting the water tank in the
machine, turn the selector switch
clockwise to the "
chine begins dispensing a small quantity
Red
of water through the steam wand. Wait
until the end of the dispensing cycle.
• At the end, place the container under
the dispensing spout.
• Turn the selector switch back to the " "
position.
Red
• The machine now carries out the rinse
cycle of the descaling solution through
the dispensing spout. Wait until the end
of the dispensing cycle.
Red
• 20 •
• 20 •
Red
" position. The ma-
Red
Red
Red
• At the end, place a container under the
steam wand.
Use a container of at least 1
litre capacity. If you do not
have a container of this capacity,
once it is fi lled close the knob, empty
the container and then place it again
under the wand and repeat the
procedure.
• After placing the container, turn the
selector switch clockwise to the "
position to stop the rinse cycle through
the steam wand.
• At the end of the second rinse cycle,
turn the selector switch back to the " "
position.
• The icon indicates that the tank must
be rinsed and fi lled.
Rinse the water tank thoroughly
and fi ll it again with fresh drinking
water up to the MAX level.
• Remove and empty the containers used
to collect the rinsing water.
• When inserting the water tank again
in the machine, the icon on the side is
displayed. Press the "
" button to
exit the descaling cycle.
"

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hd8836Hd8837Saeco syntia sup 037dr

Table of Contents