Connection - Kenwood KDC-BT720HD Instruction Manual

Wiring connection
Rear/ front/ subwoofer output
Antenna terminal
To front speaker (left)
To front speaker (right)
To rear speaker (left)
To rear speaker (right)
Ignition switch
Car fuse box
Car fuse box
Black (Ground wire)
To the metallic body or chassis of the car
Battery
Fuse (10 A)
To the optional SiriusXM Vehicle Tuner
(commercially available) ( 10)
White
If no connections are made, do not let the wire come out from the tab.
White/Black
Gray
Brown
Gray/Black
(Mute control wire)
Green
Green/Black
Purple
Light blue/yellow
Purple/Black
(Steering remote
control wire)
Red
(Ignition wire)
Yellow Blue/White
(Battery wire) (Power control wire/
Antenna control wire)
MIC (Microphone input terminal) ( 13)
To connect the Kenwood navigation system,
refer your navigations manual
(Not used)
To the power control terminal when
using the optional power amplifier or
to the antenna control terminal in the
vehicle
When connecting to an external
amplifier, connect its ground
wire to the car's chassis to avoid
damaging the unit.
Part list for installation
(A) Faceplate
(B) Trim plate
(C) Mounting sleeve
(D) Wiring harness
(E) Extraction key
27
ENGLISH