Table of Contents
Advertisement
has been unused for extended periods of time.
1
Connect the USB cable to the USB power adaptor, and
then plug the end of the USB cable into the USB port.
2
Plug the USB power adaptor into an electric socket.
3
After the battery is fully charged, disconnect the phone
from the charger. First unplug the charger from the device,
and then unplug it from the electric socket.
Battery charging tips and precautions
• Use only Hisense-approved chargers, batteries, and cables.
Unapproved chargers or cables can cause the battery to
explode or damage the phone.
• Avoid using your phone when it is charging. Do not cover
your phone or the power adaptor.
• Connecting the charger improperly may cause serious
damage to the phone. Any damage caused by misuse is not
covered by the warranty.
• If the AC power supply is of a lower voltage, then a longer
charging time may be needed.
• If non-standard chargers such as computers are used for
charging, then a longer charge time may be needed.
• Fully charge the battery before first using the phone and
disconnect the charger immediately after the first charge is
completed.
• Remove the charger from the electric socket when not
charging the phone.
• The phone may not start immediately if charging with low
12
Advertisement
Table of Contents
