Table of Contents
Advertisement
126 .....1 am 10-12-2001 14:36 Pagina 7
Program/Erase channels
Auto programming channels
Auto program
Auto program
Manual program
oœ OK MENU
System
Auto program
1
MENU
Memorizing/Erasing current channel
Channel
Auto ogramme
Fine
Storage
oœ OK MENU
&
Select
Manual Program
menu.
é
Press the OK button or the cursor
left/right to enter the Manual Program
menu.
The current channel number is displayed.
"
Press the cursor left/right.
'
Press the cursor up/down to select
another channel number.
(
Press the cursor left/right to return to
the Manual Program menu.
§
Select
Storage
è
Press the cursor left/right to select
or
Memory
Erase
!
Press the OK button.
The selected channel is memorized or
erased.
BG
TV 62
34%
TV 13
Memory
in the channel
with the cursor up/down.
.
The Auto Program function memorizes all the
receiving channels of terrestrial TV signals or
cable TV programs
&
Press the
button repeatedly to select
MENU
the channel menu.
é
Press the OK button or the cursor left/right.
The Auto Program function memorizes the
channels which are being received at that
time.
Note: If you press the
programming, the functions will stop and only
channels programmed up to that time will
remain.
"
After auto programming is finished, check
the memorized channels with the cursor
up/down.
'
Press the
button to return to the
MENU
channel menu.
Fine tune
In case of poor reception, you can improve
the reception by fine tuning.
TV channels broadcast by a cable
company
Some cable systems operate with frequency
offsets that are as much as + 2 MHz or - 2
MHz. See Conversion tables, p. 23.
Off-air channels
The frequencies for TV channels used by a
cable company may differ from the
frequencies of off-air TV channels. Consult
the tables on p. 23.
&
Select
in the Manual Program menu
Fine
with the cursor up/down.
é
Press the cursor left/right to fine tune for
the best picture and sound.
"
Press the OK button.
Installation
button in auto
MENU
7
Advertisement
Table of Contents
