Vcr Setup; When Connecting With An Antenna - LG M2362DL Owner's Manual

EXTERNAL EQUIPMENT SETUP

VCR SETUP

To avoid picture noise (interference), leave an adequate distance between the VCR and the set.
■
If a user uses 4:3 picture format for a long time, an afterimage may remain on the sides of the screen for a
■
short time.

When connecting with an antenna

Connect the RF out socket of the VCR to the antenna socket of the set.
1
2 Connect the antenna cable to the RF aerial in socket of the VCR.
Store the VCR channel on a desired channel number using the 'Manual channel
3
tuning' section.
4
Select the Channel number where the VCR channel is stored.
Press the PLAY button on the VCR.
5
18
ANTENNA/
CABLE IN S-VIDEO VIDEO
ANT OUT
1
OUTPUT
ANT IN
SWITCH
Wall Jack
2
Antenna
L R