Samsung PS42B450B1W User Manual page 23

Option
Picture Options
You can select the most comfortable colour tone to your
eyes.
You can select the picture size which best corresponds to
your viewing requirements.
When setting the picture size to Auto Wide in a 16:9 wide
TV, you can determine the picture size you want to see the
4:3 WSS (Wide Screen Service) image or nothing. Each
individual European country requires different picture size
so this function is intended for users to select it.
If the broadcast signal received by your TV is weak, you can
activate the Digital Noise Reduction feature to help reduce
any static and ghosting that may appear on the screen.
Picture
Description
■ Colour Tone → Cool / Normal / Warm1 / Warm2
•
The adjusted values are stored according to the
selected Picture mode.
•
Warm1 or Warm2 is only activated when the picture
mode is Movie.
■ Size
•
Auto Wide : Sets the picture in Auto Wide format.
•
16:9 : Sets the picture to the 16:9 aspect ratio.
•
Wide Zoom : Select this menu to view 4:3 aspect ratio
pictures over a 16:9 aspect ratio TV by stretching the
4:3 picture vertically.
•
Zoom : Stretches the 16:9 aspect ratio picture vertically.
•
4:3 : Sets the picture to the 4:3 aspect ratio.
•
Screen Fit : Displays the full native HD signal that
cannot be viewed using a normal TV.
•
Wide Zoom : Press the ► button to select Position,
then press the ENTERE button.
• Press the ▲ or ▼ button to move the screen up /
down. Then press the ENTERE button.
•
Zoom : Press the ► button to select Position, then
press the ENTERE button. Press the ▲ or ▼
button to move the picture up and down. Then press
the ENTERE button. Press the ► button to select
Size, then press the ENTERE button. Press the
▲ or ▼ button to magnify or reduce the picture size
in the vertical direction. Then press the ENTERE
button.
•
After selecting Screen Fit in HDMI (1080i / 1080p)
or Component (1080i / 1080p) mode: Select
Position by pressing the ◄ or ►button. Use the ▲,
▼, ◄ or ► button to move the picture.
• Reset : Press the ◄ or ► button to select Reset,
then press the ENTERE button. You can initialize
the setting.
• If you use the Screen Fit function with HDMI 720p
input, 1 line will be cut at the top, bottom, left and
right as in the overscan function.
■ Screen Mode
•
16:9 : Sets the picture to the 16:9 aspect ratio.
•
Wide Zoom : Select this menu to view 4:3 aspect ratio
pictures over a 16:9 aspect ratio TV by stretching the
4:3 picture vertically.
•
Zoom
: Stretches the 16:9 aspect ratio picture vertically.
•
4:3 : Selects the screen mode as 4:3.
■ Digital NR → Off / Low / Medium / High / Auto
•
When the signal is weak, select one of the other
options until the best picture is displayed.
Tint (G/R) : G50/R50
Advanced Settings
Picture Options
Picture Reset
■ In PC mode, you can only
make changes to the Colour
Tone, Size and Screen Burn
Protection from among the
items in Picture Options.
■ The picture size options may
vary depending on the input
source.
■ The items available may differ
depending on the selected
mode.
■ In PC Mode, only 16:9 and 4:3
mode can be adjusted.
■ Settings can be adjusted and
stored for each external device
you have connected to an input
of the TV.
■ Temporary image retention
may occur when viewing a
static image on the set for
more than two hours.
■ You can select these options
simply by pressing the P.SIZE
button on the remote control.
■ This function is available in
Auto Wide mode.
■ This function is not available
in PC, Component or HDMI
mode.
23 23
►