Basic Operation; Plug & Play Feature - Samsung PS42B450B1W User Manual

Basic Operation

Plug & Play Feature
When the TV is initially powered on, basic settings proceed automatically and
subsequently.
1
Press the POWER button on the remote control. You can set the menu language.
menu is automatically displayed. Select the appropriate language by pressing the
▲ or ▼ button.
Press the ENTERE button to confirm your choice.
2
Press the ◄ or ► button to select Store Demo or Home Use, then the
ENTERE button.
■ We recommend setting the TV to
home environment.
■ Store Demo mode is only intended for use in retail environments.
■ If the unit is accidentally set to
Home Use (Standard): Press the Volume button on the TV. When the volume
OSD is displayed, press and hold the MENU button on the TV for 5 seconds.
3
Press the ENTEREbutton. Select the appropriate country by pressing the ▲ or ▼
button. Press the ENTERE button to confirm your choice.
4
Press the ▲ or ▼ button to memorize the channels of the selected connection,
then press the ENTERE button.
■ Air : Air antenna signal.
■ Cable : Cable antenna signal.
5
Press the ▲ or ▼ button to select the channel source to memorize. Press the
ENTERE button to select Start.
■ Digital & Analogue
■ Digital : Digital channels.
■ Analogue : Analoguechannels.oguechannels.e channels.
•
For more detailed description of selecting Cable mode, refer to page 15.
•
The channel search will start and end automatically.
•
After all the available channels are stored, the message
is displayed.
6
Press the ENTERE button. Press the ▲ or ▼ button to select Auto, then Press
the ENTERE button.
■ If you select Manual, Set current date and time is displayed.
■ If you have received a digital signal, the time will be set automatically.
If not, see page 30 to set the clock.
7
The brief instruction on How to get the best performance from your new HDTV.
is displayed. Press the ENTERE button.
■ This menu is available
8
The message Enjoy your TV is displayed. When you have finished, press the
ENTERE button.
If you want to reset this feature...
1
Press the MENU button to display the menu. Press the ▲ or ▼ button to select
Setup, then press the ENTERE button.
2
Press the ENTERE button again to select Plug & Play.
3
Enter your 4 digit PIN number.
■ The default PIN number of a new TV set is '0-0-0-0'.
■ If you want to change PIN number, refer to page 31.
Home Use mode for the best picture in your
Store Demo mode and you want to return to
: Digital and Analogue channels.
HD Connection Guide in the Support menu.
You can set the menu language.
Menu Language
■ The Screen Saver is activated
if there is no remote control key
input for longer than 1minute
while Plug & Play is running.
■ The Screen Saver is activated if
there is no operating signal for
longer than 15 minutes.
Set the Clock Mode.
■ Press the
at any time to interrupt the
memorization process.
■ The
available in the TV mode.
Plug & Play Plug & Play
▲
Nederlands
English
:
Eesti
▼
U Move E Enter
ENTERE button
Plug & Play
►
Menu Language : English
Time
Broadcast
Security
General
Plug & Play feature is only
13