Table of Contents
Advertisement
10
www.aeg.com
The lamp may turn off
automatically at a
temperature below 60 °C
during some oven functions.
6.3 Setting a heating function
1. Turn the knob for the heating
functions to select a heating function.
2. Turn the control knob to select the
temperature.
The lamp turns on when the oven
operates.
7. CLOCK FUNCTIONS
7.1 Clock functions table
Clock func-
tion
TIME OF DAY
DURATION
END
TIME DELAY
MINUTE
MINDER
Application
To show or change the
time of day. You can
change the time of day
only when the oven is off.
To set how long the oven
works. Use only when a
heating function is set.
To set when the oven
turns off. Use only when a
heating function is set.
Combination of DURA-
TION and END function.
Use to set a countdown
time. This function has no
effect on the operation of
the oven. You can set the
MINUTE MINDER at any
time, also if the oven is
off.
3. To turn off the oven, turn the knob
for the heating functions to the off
position.
6.4 Heat-up indicator
When the oven function operates, the
bars in the display
when the temperature in the oven
increases, and disappear when it
decreases.
Clock func-
Application
tion
00:00
If you do not set any oth-
COUNT UP
er clock function the
TIMER
COUNT UP TIMER auto-
matically monitor how
long the oven works.
It is on immediately when
the oven starts to heat.
The Count Up Timer can-
not be used with the
functions: DURATION,
END.
7.2 Setting and changing the
time
After the first connection to the mains,
wait until the display shows
"12:00". "12" flashes.
1. Press
or
to set the hours.
2. Press
to confirm and set the
minutes.
The display shows
hour. "00" flashes.
3. Press
or
to set the current
minutes.
4. Press
to confirm or the set time of
day will be saved automatically after
5 seconds.
The display shows the new time.
appear one by one
and
and the set
Advertisement
Table of Contents
