Table of Contents
Advertisement
†
¢
}
„
@
c/b
˜
Š
--------
Information in the display
Display
Please empty condensate container
Please clean lint filter
Basic machine care required.
Wi-Fi
Wi-Fi
Remote Start
Energy manager
Control elements:
Change selection
Additional options
Additional programs
Information
■
■
■
■
■
Cleaning the base unit ~ Page 55
After a certain period, the appliance automatically rec-
ommends that you run the basic appliance care pro-
gramme. Run the basic appliance care programme.
~ Page 61
Off: Wi-Fi is switched off and your appliance is
■
not connected to your home network.
Flashing: The appliance is trying to connect to
■
your home network.
Lit: Wi-Fi is switched on and your appliance is
■
connected to your home network.
Wi-Fi is switched on but your appliance has been
unable to connect to your home network.
lights up: Remote start function is activated.
~ Page 30
Lit: appliance is connected to the smart energy sys-
tem (Energy manager) (not available in every coun-
try)
Active control element for the upper or lower but-
ton.
Empty the condensation container and then rein-
sert it.~ Page 37
Then press inicio/pausa+carga (Start/
Pause+Reload).
Clean the filter in the condensation container.
~ Page 59
If the optional drain hose* is installed, make sure
that the drain hose:
– Is correctly connected. ~ Page 52
– Is not kinked or bent.
– Is not blocked or clogged, e.g. by deposits.
Run the intensive appliance care programme.
~ Page 62
Check that no debris has found its way into the base
unit. Open the maintenance flap and remove any
debris. ~ Page 55
Display
en
25
Advertisement
Table of Contents
