1 Hood & Firebox Assembly 11 - Brinkmann 810-4221-S Owner's Manual

Note: With the help of a friend,
turn the cart to its upright
position.
Step 6
Unscrew the pre-attached bolts
from the tank retention bracket.
Attach tank retention bracket in
between right front and rear cart
legs using the two pre-attached
bolts as illustrated. Attach the tank
brace by inserting the carriage bolt
through the keyhole, slide down and
then use the wing nut to secure.
Note: When performing Step 7,
lift grill body from front and
rear panels to avoid injury
to hands and fi ngers.
Step 7
With the help of a friend, place grill
body assembly on cart assembly
as illustrated. Attach using eight
M6 X 12 mm bolts as illustrated.
23
Bolts
Hood & Firebox
Assembly
Tank Retention
Support Bracket
Tank Retention
Bracket
Carriage Bolt
Cart Front End
Cart Back End
Wing Nut