Kenwood DDX9905S Instruction Manual page 8

Basic Operations
■ [Display]
Set the button illumination color.
If it is hard to see the image on the screen
even, adjust the viewing angle.
1 Touch [Display].
2 Touch [Key Color].
3 Select the desired color.
4 Touch [
].
5 Touch [Viewing Angle].
6 Select an angle
7 Touch [
].
For details of, see Display Setup (P.75).
■ [Camera]
Set the parameters for the camera.
1 Touch [Camera].
2 Set each item and touch [
For details of, see Camera Setup (P.69).
[OEM SETUP]
■
This function requires a commercial adaptor.
Consult your KENWOOD dealer for details.
■ [DEMO]
Set the demonstration mode. Default is "ON".
1 Touch [DEMO] and select ON or OFF.
2
Touch [Finish].
NOTE
• These settings can be made from the SETUP
menu. See Setup (P.72).
8
Security Code Setup (DDX9018BTS)
You can set up a security code to protect your
receiver system against theft.
When the Security Code function is activated,
the code cannot be changed and the function
cannot be deactivated. Note that the Security
Code can be set with a 4 digit number of your
choice.
1
Press the [MENU] button.
h Popup menu appears.
2
Touch [SETUP].
].
h SETUP Menu screen appears.
3
Touch [Security].
h Security screen appears.
4
Touch [Security Code Set] on the Security
screen.
h Security Code Set screen appears.
5
Enter a security code with 4 digits and
touch [Enter].
6
Enter the same code again and touch
[Enter].
Now, your security code is registered.
h
h
h
h