Issues
A "Mode Not Supported"
message appears.
There is a plastic smell from the
TV.
The TV
Signal Information
unavailable in the Self Diagnostic
menu.
The TV is tilted to the side.
◀
The channel menu is greyed
out. (unavailable)
Your settings are lost after 30
minutes or every time the TV is
turned off.
Solutions and Explanations
•
Check the supported resolution of the TV, and adjust the external
device's output resolution accordingly.
•
This smell is normal and will dissipate over time.
•
This function is only available with digital channels from an Antenna / RF/
is
Coax connection.
•
Remove the base stand from the TV and reassemble it.
•
The
Channel
•
If the TV is in the
settings every 30 minutes. Change the settings from
to
Home Use
the
SOURCE
(Initial setup) → ENTERE.
Plug & Play
English
menu is only available when the TV source is selected.
Store Demo
mode, it will reset audio and picture
mode in the Plug & Play (Initial setup) procedure. Press
button to select TV mode, and go to
Store Demo
mode
→
→
MENU
System
▶