Jackshaft Drive Belt - Walker T Series Operator's Manual Safety, Assembly, Operating, And Maintenance Instructions

Maintenance Instructions

Jackshaft Drive Belt

1. To remove the jackshaft drive belt:
a. Remove the engine PTO drive belt, as
described in previous section.
Tension Spring
2. Reverse the removal procedure to replace the
jackshaft drive belt.
Tension Spring
80
Push Idler Pulley Down to Relax Belt
Idler Pulley
Jackshaft
Drive Belt
Jackshaft Drive Belt (Disengaged)
Idler Arm
Jackshaft
Drive Belt
Jackshaft Drive Belt (Engaged)
REPLACING/REPAIRING
b. Relax the belt by depressing the spring-
loaded idler arm.
c. Roll the belt off the jackshaft pulley and
remove.
Engine
Pulley
Jackshaft
Engine
Pulley
Jackshaft