Advertisement
6. Troubleshooting
The dishwasher is capable of signalling a number of faults through the
simultaneous illumination of several indicator lights, with the following
meanings:
FAULT
E1
E2
E3
E4
E5
E6
User instructions
Acquastop failure
The anti-flooding system has been activated (for
the relevant models only). The system is tripped in
case of water leaks. Contact the after-sales
service.
Safety level
The system which limits the water level inside the
dishwasher has been tripped. Interrupt the
program and switch off the dishwasher. Switch the
dishwasher back on, program it again and start the
washing cycle. If the problem persists, contact the
after-sales service.
Water heating malfunction
The water is not heated or the heating parameters
are not correct. Repeat the washing program; if the
problem persists, contact the after-sales service.
Water temperature monitoring malfunction
Interrupt
dishwasher. Switch the dishwasher back on,
program it again and start the washing cycle. If the
problem persists, contact the after-sales service.
Water intake malfunction
The appliance does not take in water or does not
do so correctly. Check that the water connections
are correct, the water intake tap is turned on and
the filter is not fouled. If the problem persists,
contact the after-sales service.
Water pump-out malfunction
The appliance does not pump out the water or
does not do so correctly. Check that the drain hose
is not kinked or crushed and that the siphon and
filter are not fouled. If the problem persists, contact
the after-sales service.
DESCRIPTION
the
program and
switch
off the
43
Advertisement
