Table of Contents
Advertisement
Quick Links
Contents
1
INTRODUCTION ......................................................................................... 3
2
SAFETY INFORMATION ............................................................................. 5
3
INSTALLATION MATERIAL ......................................................................... 8
3.1
Kit supplied with dishwasher ....................................................................... 9
4
DIMENSIONS OF DISHWASHER ............................................................. 10
5
INSTALLATION AND HOOK-UP ................................................................ 11
5.1
Leveling ...................................................................................................... 12
5.2
Connections ............................................................................................... 13
5.2.1
Connecting to the water supply .................................................................. 14
5.2.1.1
Connecting to the water tap ....................................................................... 15
5.2.1.2
Connecting the drain hose ......................................................................... 17
5.2.2
Electrical connections and warnings .......................................................... 22
5.3
Commissioning .......................................................................................... 23
5.3.1
Installation procedure ................................................................................. 23
5.4
Testing. .......................................................................................................27
CONTENTS
EN
1
Advertisement
Table of Contents
Related Manuals for Smeg STFABURD-1
Summary of Contents for Smeg STFABURD-1
-
Page 1: Table Of Contents
CONTENTS Contents INTRODUCTION ..................3 SAFETY INFORMATION ................5 INSTALLATION MATERIAL ................. 8 Kit supplied with dishwasher ............... 9 DIMENSIONS OF DISHWASHER ............. 10 INSTALLATION AND HOOK-UP ..............11 Leveling ...................... 12 Connections ....................13 5.2.1 Connecting to the water supply ..............14 5.2.1.1 Connecting to the water tap ............... - Page 2 CONTENTS...
-
Page 3: Introduction
INTRODUCTION Thank you for choosing one of our products. To install this dish- Thank you for choosing one of our products. To install this dish- washer correctly and safely, please read this manual carefully. The washer correctly and safely, please read this manual carefully. The manual is divided into sections giving you a step-by-step guide to manual is divided into sections giving you a step-by-step guide to installation of the appliance. - Page 4 INTRODUCTION Symbols used in this manual (see tab. 1-01) DANGER. This symbol highlights information and warnings which, if not observed, may compromise personal safety or damage the appliance. DANGER OF ELECTROCUTION. This symbol highlights information and warnings of an electrical nature which, if not observed, may compromise personal safety or damage the appliance.
-
Page 5: Safety Information
WARNINGS IT MUST ALWAYS BE KEPT INTACT TOGETHER WITH THE DISH- IT MUST ALWAYS BE KEPT INTACT TOGETHER WITH THE DISH- WASHER. BEFORE USING THE APPLIANCE, CAREFULLY READ WASHER. BEFORE USING THE APPLIANCE, CAREFULLY READ ALL THE INSTRUCTIONS CONTAINED IN THIS MANUAL. ALL THE INSTRUCTIONS CONTAINED IN THIS MANUAL. - Page 6 WARNINGS THE DOMESTIC MAINS POWER SUPPLY MATCH THE RATINGS ON THE NAME PLATE OF THE APPLIANCE. TWO PEOPLE WEARING SAFETY GLOVES ARE REQUIRED TO LIFT THE DISHWASHER. PERVISED WITHIN THE HOME. SEPARATE THE VARIOUS PACK- AGING MATERIALS AND TAKE THEM TO THE NEAREST SORTED WASTE COLLECTION CENTRE.
- Page 7 WARNINGS NECT IT FROM THE ELECTRICAL POWER SUPPLY AND CALL THE NECT IT FROM THE ELECTRICAL POWER SUPPLY AND CALL THE NEAREST TECHNICAL SERVICE CENTRE. DO NOT ATTEMPT TO NEAREST TECHNICAL SERVICE CENTRE. DO NOT ATTEMPT TO REPAIR THE APPLIANCE. REPAIR THE APPLIANCE.
-
Page 8: Installation Material
INSTALLATION INSTRUCTION INSTALLATION MATERIAL t l l y l t o l l a i r e r i • i l l i v i r . f e fi ; ) 1 • spirit level (ref. B fi g. 3-01); •... -
Page 9: Kit Supplied With Dishwasher
INSTALLATION INSTRUCTION Kit supplied with dishwasher The kit supplied with the dishwasher comprises: • 1 adhesive steam guard (depending on the model) (ref. A fi g. 3-02); • 1 steel steam guard (depending on the model) (ref. B fi g. 3-02)*; •... -
Page 10: Dimensions Of Dishwasher
(See fig.4-01) 82 cm - 87 cm 59.7 cm - 59.9 cm 58.5 cm 32-9/32"; 34-1/4" 23-1/2"; 23-37/64" 23-1/32"... -
Page 11: Installation And Hook-Up
INSTALLATION INSTRUCTION ON THE SHARP EDGES OF THE APPLIANCE. o i t i l p stallation position. The sides and rear of the appliance can lie against kitchen units or walls. If the dishwasher is installed next to a heat source, separate it with a heat insulating panel in order to prevent overheating and malfunctions. -
Page 12: Leveling
INSTALLATION INSTRUCTION • If the appliance is not in a niche and can therefore be accessed on one side, cover the door hinge area for safety reasons (cutting hazard). Covers are available as accessories from specialized retailers or from the Technical Service Centre. -
Page 13: Connections
INSTALLATION INSTRUCTION Fig. 5-02 Connections t l l o l l c i r draulic connections through the adjacent unit. These connections must never be behind the dishwasher. The inlet and drain hoses can be pointed in all directions. make sure that they are not bent, crushed or too tight. -
Page 14: Connecting To The Water Supply
INSTALLATION INSTRUCTION h t i ) ” r i u hoses and power cord (ref. A fi g. 5-04). Make sure there area no rough edges that could damage the power cord or hoses. If the dishwasher is installed in a metal unit protect the edge of the through hole for the hoses and power cord with a gasket. -
Page 15: 5.2.1.1 Connecting To The Water Tap
INSTALLATION INSTRUCTION 5.2.1.1 Connecting to the water tap ¾ ” t fi n i t e i l fi lter (ref. A fi g. 5-05). Firmly secure the hose by tightening the relative ring nut with your hands (ref. B fi g. 5-05); fi nish by tightening another ¼... - Page 16 INSTALLATION INSTRUCTION Do not cut the inlet hose (see fi g. 5-06). If the hose is cut, the dishwasher will not work, water will leak and you may be injured. If the hose is too long, wind it up tidily and place it behind the appliance. The cable harness and electrical components must not come into contact with the hydraulic system and the water inlet and drain hoses.
-
Page 17: Connecting The Drain Hose
INSTALLATION INSTRUCTION Insert the relative hose into a drain with a minimum diameter of 4 cm (1-37/64”) (ref. A fi g. 5-08); alternatively, place the hose on the sink (ref. B fi g. 5-08) using the supplied hose support (see fi g. 5-9), but taking care to avoid obstructions or excessive curving. - Page 18 INSTALLATION INSTRUCTION Connecting to a “T” union of the drain circuit MAKE THE CONNECTION UPLINE FROM THE SIPHON OF THE DRAIN LINE AND AT LEAST 400 mm (15-3/4”) ABOVE THE FLOOR ON WHICH THE DISHWASHER WILL BE INSTALLED. Connect the dishwasher drain hose (ref. A fi g. 5-10) to the “T” union (ref. B fi...
- Page 19 INSTALLATION INSTRUCTION Connecting to a waste disposal unit with an air gap MAKE THE CONNECTION UPLINE FROM THE SIPHON OF THE DRAIN LINE AND AT LEAST 400 mm (15-3/4”) ABOVE THE FLOOR ON WHICH THE DISHWASHER WILL BE INSTALLED. Remove the cover of the waste disposal unit (ref. A fi g. 5-11). Connect the dishwasher drain hose (ref.
- Page 20 INSTALLATION INSTRUCTION Connecting to the air gap (no waste disposal unit) MAKE THE CONNECTION UPLINE FROM THE SIPHON OF THE DRAIN LINE AND AT LEAST 400 mm (15-3/4”) ABOVE THE FLOOR ON WHICH THE DISHWASHER WILL BE INSTALLED. Connect the dishwasher drain hose (ref. A fi g. 5-12) to the air gap (ref. B fi g. 5-12) using the wide spring clamp (ref.
- Page 21 INSTALLATION INSTRUCTION Connecting to a waste disposal unit (no air gap) MAKE THE CONNECTION UPLINE FROM THE SIPHON OF THE DRAIN LINE AND AT LEAST 400 mm (15-3/4”) ABOVE THE FLOOR ON WHICH THE DISHWASHER WILL BE INSTALLED. Remove the cover of the waste disposal unit (ref. A fi g. 5-13). Connect the dishwasher drain hose (ref.
-
Page 22: Electrical Connections And Warnings
INSTALLATION INSTRUCTION MAINS MATCH THE RATINGS ON THE NAME PLATE OF THE AP- PLIANCE POSITIONED ON THE INNER EDGE OF THE DOOR. IN THE EVENT OF DAMAGE TO THE SUPPLY CORD, HAVE IT REPLACED BY THE MANUFACTURER OR AN AUTHORIZED TECHNICAL SERVICE CENTRE. -
Page 23: Commissioning
INSTALLATION INSTRUCTION IF THE PLUG IS NOT SUITABLE FOR THE SOCKET, CALL IN A QUALIFIED ELECTRICIAN TO FIT A SUITABLE PLUG. The plug at the end of the power cord and the corresponding socket must be of the same type and must conform to current regulations governing electrical appliances. - Page 24 Fig. 5-16 Fig. 5-17...
- Page 25 INSTALLATION INSTRUCTION Before securing the dishwasher to the adjacent units, attach the gaskets to the sides. Remove the adhesive band on the gasket (see fi g. 5-18). Fig. 5-18 Fix the gasket to the dishwasher, inserting it in the seat on the sides towards the front (see fi...
- Page 26 INSTALLATION INSTRUCTION Fig. 5-20 Fig. 5-21 shows the state of the dishwasher after the above operations are performed. Fig. 5-21 Tighten the supplied screws with a screwdriver; this operation defi nitively fi xes the dishwasher to the adjacent units; cover the side holes using the supplied plugs (ref.
-
Page 27: Testing
INSTALLATION INSTRUCTION Fig. 5-22 Testing After installation, test the dishwasher by starting a work cycle. Check for leaks and make sure the appliance does not malfunction.