System - D-Link DAP-1120 User Manual

Section 3 - Web-based Configuration
This page allows you to save or restore your system configuration, reset or reboot the DAP-1120. To access this page, click on
the Management drop down menu at the top of the page, and select System. Click Save at any time to save the changes
you have made on this page.
Save Settings Save the system settings onto a file to the local hard drive.
To Local Hard You will then see a file dialog where you can select a location
Drive: and file name for the settings.
Load Settings Load the system settings from a file on the local hard drive.
From Local
Hard Drive:
Restore Restore the system settings to factory default settings. This
to Factory will erase all currently stored settings.
Default
Settings:
Reboot the Click Reboot to reboot the DAP-1120.
Device:
D-Link DAP-1120 User Manual

System

28