Advertisement
Help Guide
Digital 4K Video Camera Recorder/Digital HD Video Camera Recorder
FDR-X3000/HDR-AS300/HDR-AS50
Viewing images on a TV (FDR-X3000/HDR-AS300)
Connect the camera to a TV which has an HDMI terminal using a micro HDMI cable (sold separately). Refer also to the
instruction manuals of the TV.
Turn off both the camera and the TV.
1
Open the connector cover and connect the camera to the TV with the micro HDMI cable (sold separately).
2
Turn on the TV and set the input of the TV to [HDMI input].
3
Press the
(on/standby) button on the camera to turn on.
4
Press the MENU button.
5
Press the UP button or DOWN button to select
6
view.
Select the settings below.
: MP4 movies
: Still images
: XAVC S 4K (30p) movie (
is selected.) (FDR-X3000)
: XAVC S 4K (24p) movie (
: XAVC S HD movie
Press the REC/ENTER button.
7
Playback starts.
Playback pauses when you press the REC/ENTER button again.
To control a content being played back
Fast-rewind/fast-forward (movies only): Press the UP button or DOWN button. During the fast-rewind/fast-forward,
each time you press the button, the speed changes in 4 levels.
Pause (movies only): Press the REC/ENTER button.
If you press the UP button or DOWN button during pause, rewind or forward can be performed. If you press and hold
the UP button or DOWN button during pause, slow rewind or slow forward can be performed.
Starting a slideshow (still images only): Press the REC/ENTER button.
Ending playback: Press the MENU button, then select
*
The icon of the current selected shooting mode is displayed.
To adjust the volume
1. Press the MENU button during the playback or pause.
2. Press the UP button or DOWN button to select
controller.
(playback on TV) - desired format of movie/image to
is displayed when NTSC is selected and
is only displayed when NTSC is selected.) (FDR-X3000)
*
(shooting mode) to switch to the shooting mode.
-
, then press the REC/ENTER button to display the volume
is displayed when PAL
Advertisement
