Advertisement
*
In the following situations, the time code is fixed to
When the image quality is set to 24p.
When the NTSC/PAL switching is set to
(Sets the time code count up format)
: The time code advances only while recording XAVC S movies. It is recorded sequentially from the
time code on the image recorded last time.
: The time code advances sequentially, regardless of the operation of the camera.
(Sets the time code to be recorded)
: The newly set-up time code is recorded on recording media.
: The last time code of the previous recording is read out from the recording media and the new time
code is recorded sequentially from the last time code.
(Sets the user bit)
1. Press the UP button or DOWN button to select 2-digit numbers, then press the REC/ENTER button.
2. Repeat step 1 until you set four 2-digit numbers, then return to the previous MENU.
The user bit can be selected within the following range.
00 00 00 00 - FF FF FF FF
(Initializes the user bit)
Reset is executed when you select
(Sets the recording time of the user bit)
: Records the time as a user bit.
: Does not record the time as a user bit.
.
.
, then press REC/ENTER button.
Advertisement
