Setting The Dimmer; Adjusting The Picture - Pioneer AVH-190DVD Operation Manual

System settings
p This setting is available only when you stop your vehicle in a
safe place and apply the handbrake.
p Do not use sharp pointed tools such as a ballpoint or
mechanical pen, which could damage the screen.
p Do not turn off the engine while saving the adjusted position
data.
1 Display the "System" setting screen.
 Displaying the "System" setting screen on page 21
2 Touch [Touch panel calibration].
3 Touch [Yes].
4 Touch four corners of the screen along the
arrows.
5 Press .
The adjustment results are saved.
6 Press once again.
Proceed to 16-point adjustment.
7 Gently touch the centre of the "+" mark dis-
played on the screen.
The target indicates the order.
 When you press , the previous adjustment
position returns.
 When you press and hold
cancelled.
8 Press and hold .
The adjustment results are saved.

Setting the dimmer

Setting the dimmer trigger
p This setting is available only when you stop your vehicle in a
safe place and apply the handbrake.
1 Display the "System" setting screen.
 Displaying the "System" setting screen on page 21
2 Touch [Dimmer Settings].
3 Touch [Dimmer Trigger].
4 Touch the item.
 Auto (default):
Switches the dimmer to on or off automatically according to
your vehicle's headlight turning on or off.

Manual:
22
Switches the dimmer to on or off manually.

Time:
Switches the dimmer to on or off at the time you adjusted.
Setting the dimmer duration in day
or night
p You can use this function when "Dimmer Trigger" is set to
"Manual".
p This setting is available only when you stop your vehicle in a
safe place and apply the handbrake.
1 Display the "System" setting screen.
 Displaying the "System" setting screen on page 21
2 Touch [Dimmer Settings].
3 Touch [Day/Night] to switch the following
items.

Day (default):
Turns the dimmer manually to off.
 Night:
Turns the dimmer manually to on.
Setting the dimmer duration
optional
, the adjustment is
You can adjust the time that the dimmer is turned on or off.
p You can use this function when "Dimmer Trigger" is set to
"Time".
p This setting is available only when you stop your vehicle in a
safe place and apply the handbrake.
1 Display the "System" setting screen.
 Displaying the "System" setting screen on page 21
2 Touch [Dimmer Settings].
3 Touch [Dimmer Duration].
The "Duration Setting" screen appears.
4 Touch the time display to activate the adjust-
ment mode.
5 Touch the graph to set the dimmer duration.
 You can also set the dimmer duration touching
or
Each touch of
wards or forwards in the 15 minute width.
p The default setting is 18:00-6:00 (6:00 PM-6:00 AM).
.
or moves the cursor back-
 When the cursors are placed on the same point,
the dimmer available time is 0 hours.
 When the cursor for off time setting is placed on
the left end and the cursor for on time setting is
placed on the right end, the dimmer available
time is 0 hours.
p When the cursor for on time setting is placed on the left end
and the cursor for off time setting is placed on the right end,
the dimmer available time is 24 hours.
 The time display of the dimmer duration adjusting
bar is depending on the clock display setting.
 Setting the time and date on page 28

Adjusting the picture

You can adjust the picture for each source and rear view camera.
CAUTION
For safety reasons, you cannot use some of these functions
while your vehicle is in motion. To enable these functions, you
must stop in a safe place and apply the handbrake. Refer to
Important Information for the User (a separate manual).
1 Display the screen you wish to adjust.
2 Display the "System" setting screen.
 Displaying the "System" setting screen on page 21
3 Touch [Picture Adjustment].
4 Touch the item to select the function to be
adjusted.
 Brightness:
Adjusts the black intensity. (–24 to +24)

Contrast:
Adjusts the contrast. (–24 to +24)

colour:
Adjusts the colour saturation. (–24 to +24)
 Hue:
Adjusts the tone of colour (which colour is emphasised, red
or green). (–24 to +24)

Dimmer:
Adjusts the brightness of the display. (+1 to +48)
 With some pictures, you cannot adjust Hue and
colour.
 When you touch [Rear View], the mode changes
to the picture adjustment for rear view. By touch-
ing [Source], you can return to the picture adjust-
ment for AV source.