Cluster Member - ZyXEL Communications ES-2024A Support Notes

A clustering member listens on UDP port 263. When a clustering member
receives a request with the matching signature, it answers with a HDAP
Discover Response. In the response, the clustering member provides identity
information about itself.
Step 3:
Cluster manager
(Master device)
HDAP_SET_ADDR_REQ (Master device) packet request is used for a
clustering manager to assign an IP address and subnet mask to a clustering
member.
Step 4:
Cluster manager
(Master device)
HDPA_SET_ADDR_RSP (Slave device) packet response is for a clustering
member to acknowledge a "Set Address" request. The hardware address
uniquely identifies the sender of this response.
After the processes are done, the cluster master will be able to manage the
All contents copyright (c) 2006 ZyXEL Communications Corporation.
3. HDAP_SET_ADDR_REQ
(Address set / Password
challenge)
4. HDAP_SET_ADDR_RSP
ES-2000 Series Switch Support Notes

Cluster member

(Slave device)
Cluster member
(Slave device)
78