Table of Contents
Advertisement
Chapter 3 - Installation
Automatic Setup
The AirNavigator CD can step you through installing your AirStation. To step through the setup
program, insert the CD into your Windows 7/Vista/XP PC and follow the instructions on the screen.
If your computer uses a different operating system, use manual setup instead.
Note: · To use a wireless client in Windows 7 or Vista, perform setup using the AirNavigator CD to automatically
generate a profile for wirelessly connecting to the AirStation. After setup is complete, once the LAN
cable is removed, you can connect from your wireless client to the AirStation.
· Before performing setup, make the settings to enable the wireless client of the computer.
Manual Setup
To configure your AirStation manually, follow the procedure below.
1
Power off your computers and networking equipment.
2
Connect your computer to one of the LAN ports on the rear of the AirStation with the
supplied Ethernet network cable.
WBMR-HP-GNV2 User Manual
14
Advertisement
Table of Contents
