Table of Contents
Advertisement
End of programme
The time display shows 0:00. The
symbol will remain lit up in the control
panel. The door is locked in the anti-
crease phase.
Touch the Start/Stop sensor.
The door will unlock and the symbol
appears in the control panel.
Pull open the door.
Remove the laundry.
Energy savings
– Ten minutes after the beginning of the
anti-crease phase, the indicators dim
and the Start/Stop sensor starts
flashing.
– Fifteen minutes after completion of
the anti-crease phase, the washing
machine is completely switched off
and the door lock lifted.
6. End of programme - unload the drum
Items left in the drum could discolour
other items in the next wash or be-
come discoloured themselves.
Check that all items have been re-
moved from the drum!
Check the folds in the door seal for
any small articles, e.g. buttons, which
might be lodged there.
Tip: Leave the door slightly open to al-
low the drum to dry.
Turn the programme selector to the
position. This switches the washing
machine off.
If applicable, remove the used cap-
sule from the detergent dispensing
drawer.
Tip: Leave the detergent dispenser
drawer slightly open to allow it to dry.
27
Advertisement
Table of Contents
