JVC Everio R GZ-RX645 Detailed User Manual page 106

Using Wi-Fi
5
Tap "ADD".
(Operation on this camera)
.
6
Tap "EZ REGISTRATION WPS".
(Operation on this camera)
.
7
Activate WPS of the access point (wireless LAN router) within 2 minutes.
To activate WPS, refer to the instruction manual of the device in use.
0
8
After registration is complete, tap "OK" on the camera's screen.
(Operation on this camera)
.
The following registration methods are also available.
0
"Registering Access Point Using WPS PIN" (A p. 111)
"Registering Access Point Manually" (A p. 143)
106
Operation Method
o
Connecting the Camera to the Smartphone
1
Tap "MENU".
(Operation on this camera)
.
The top menu appears.
0
2
Tap the "Wi-Fi" (Q) icon.
(Operation on this camera)
.
3
Tap "ACCESS POINT CONNECTION".
(Operation on this camera)
.
4
The following is displayed when the camera is connected to the access
point.
.
Tapping "INFO." displays the URL (WAN) for connecting the
0
smartphone.
(Does not appear if DDNS is not set or set incorrectly.)
"LUPnP" is displayed when UPnP cannot be used.
0