Brother CS-8070 Operation Manual page 111

S2_brotherE.book Page 105 Thursday, February 13, 2003 11:03 AM
Symptom
The feed dogs are lowered.
The stitch is too fine.
The presser foot that is used is not
The fabric does
appropriate for the type of stitch that
not feed.
you wish to sew.
The thread is tangled, for example,
in the shuttle.
The sewing lamp
The sewing lamp is damaged.
does not come on.
Probable Cause
Slide the drop feed lever to the left.
Lengthen the stitch length.
Attach the presser foot that is appro-
priate for the type of stitch that you
wish to sew.
Remove the tangle thread. If the
thread is tangled in the shuttle, clean
the shuttle.
Contact your retailer or the nearest
authorized service center.
Remedy Reference
page 83
page 52
page 96
page 100
Troubleshooting
–
4
105