Bosch GRL2000-40HV Operating Instructions Manual page 9

target plate generate a field that can impair the
function of cardiac pacemakers.
Keep the tool, laser receiver LR20 (23), and
laser target plate (29) away from magnetic
data medium and magnetically-sensitive
equipment. The effect of the magnets of
the tool and laser target plate can lead to
irreversible data loss.
Use the correct tool for your application.
The correct tool will do the job better
and safer.
Do not use the tool if the switch does not
turn it on and off. Any tool that cannot be
controlled with the switch is dangerous and
must be repaired.
Store idle tool out of the reach of children
and do not allow persons unfamiliar with
the tool or these instructions to operate
the tool. Tools are dangerous in the hands of
untrained users.
1.800.561.8187
Magnets
Keep the tool, laser receiver LR20
(23), and laser target plate (29)
away from cardiac pacemakers.
The magnets of the tool and laser
Use and care
SAVE THESE INSTRUCTIONS.
www.
Maintain tools. Check for misalignment or
binding of moving parts, breakage of parts
and any other condition that may affect
the operation. If damaged, have the tool
repaired before use. Many accidents are
caused by poorly maintained tools.
Use the tool, accessories, etc., in
accordance with these instructions and in
the manner intended for the particular type
of tool, taking into account the working
conditions and the work to be performed.
Use of the tool for operations different from
those intended could result in a hazardous
situation.
Service
Have your tool serviced by a qualified
repair person using only identical
replacement parts. This will ensure that the
safety of the tool is maintained.
Develop a periodic maintenance schedule
for tool. When cleaning a tool be careful
not to disassemble any portion of the tool
since internal wires may be misplaced or
pinched or may be improperly mounted.
Certain cleaning agents such as gasoline,
carbon tetrachloride, ammonia, etc., may
damage plastic parts.
-9-
information@itm.com
.com