Table of Contents
Advertisement
Control Panel Functions
AUTO Button
INPUT Button
(SOURCE Hot key)
EXIT Button
Power Button &
Power Indicator
AUTO IMAGE ADJUSTMENT
When adjusting your display settings, always press
the AUTO button before entering the On Screen
Display(OSD). (Only Analog Mode)
This will automatically adjust your display image to
the ideal settings for the current screen resolution
size (display mode).
The best display mode is
1920 x 1080
W2240V :
1920 x 1080
W23240V :
1920 x 1080
W2340VG :
When two input signals at least are connected, you can
select the input signal (D-SUB/DVI/HDMI) you want.
When only one signal is connected, it is automatically
detected. The default setting is D-Sub.
Exit the OSD (On Screen Display).
Use this button to turn the display on or off.
The power indicator stays white if the display is running
properly (On Mode). If the display is in Sleep Mode
(Energy Saving), the power indicator is blinking white.
10
Advertisement
Table of Contents
