Movement Specifications - BR Remote Camball 4Ki Instruction Information

Notes
Pan and Tilt Home Positions can be defined by the user.
A virtual model of the Camball can be downloaded from Cast Software. This can be used
directly with the BlackTrax software for motion tracking.
There is a little backlash in the pan & tilt axes. This may be noticeable on very tight lens angles
when moving to a position from different directions. The VR versions use the shaft encoders so
this effect is not apparent.
Range of Movement & Resolution
Pan:
Pan Movement in DMX:
Pan Home:
DMX resolution:
DMX angular movement:
Pan Movement in Free-D
Free-D resolution:
Tilt:
Tilt Movement DMX & FreeD: +/- 120 deg. From HOME (240 deg. +/- 2deg)
Tilt Home:
DMX Resolution:
DMX angular movement:
Free-D resolution:
Zoom 18x:
Zoom Wide HFOV:
Zoom Tight HFOV:
DMX Resolution:
DMX zoom angle:
Free-D Resolution:
Free-D zoom angle:
Focus:
Focus Range:
DMX Resolution:
Free-D Resolution:
Iris:
Iris Range:
Iris Resolution:
DMX Resolution:
DMX steps:
+/- 368 deg. From HOME. (736 deg. +/- 2deg.)
Normally, directly away from sockets.
16 bit – 2 channels
1 DMX bit = 0.0112 deg.
360degrees – continuous rotation
16 bit – . 65,536 counts per 360deg. 1 bit = 0.0055 deg. .
Directly upwards (away from socket base)
16 bit – 2 channels
1 DMX bit = 0.0037 deg.
16 bit – . 65,536 counts per 360deg. 1 bit = 0.0055 deg.
approx. 60 deg.
apporx 3.3 deg.
16 bit – 2 channels
1 DMX bit = 0.0857 deg. Tight = 0xFFFF, Wide = 0x0000
16 bit
1 bit = 0.0857 deg. Tight = 0xFFFF, Wide = 0x0000
10 mm. (at wide) - Infinity
8 bit – 1 channel
16 bit
F1.6 – F28
255 steps
8 bit – 1 channel
1 Iris step = 1 DMX bit
- 10 -
www.cast-soft.com