Table of Contents
Advertisement
OPERATION
•
Press the switch to ON ( I ) position to start the motor.
•
To stop the motor, release the trigger and press the switch to OFF( O ) position.
NOTE: The pressure washer may be on and the system may have pressure even when the
pump and/or motor cannot be heard running. Always use caution around the pressure washer.
C A U T I O N
Hold the trigger handle securely with both hands. Expect the trigger handle to move when the
trigger is pulled due to reaction forces. Failure to do so could cause loss of control and injury to
yourself and others.
NOTE: AUTO ON/OFF SWITCH: This pressure washer is equipped with an auto start/stop
feature. To operate:
down immediately. Once the trigger of the gun is depressed, the unit will turn on. Unit will shut
off and be in standby mode when trigger is released.
Set the power switch to the On (I) position.
Pump will pressurize and shut
19
ON/OFF Switch
Fig. 13
Advertisement
Table of Contents
