GreenWorks GPW1954 Owner's Manual page 15

ASSEMBLY
ATTACHING THE SOAP TANK
• Align the keyhole slots with the mounting posts.
• Slide onto mounting posts and push down to hold in place.
• Route the detergent injection hose under the unit and onto the detergent injection hose fitting
on the back of the pump as shown.
USING THE HOSE REEL
To remove the high pressure hose from the reel:
• Remove one end of the high pressure hose from the hose reel.
• Unwind the high pressure hose by turning the reel handle counter clockwise.
• Remove the other end of the high pressure hose from the reel and set the hose aside.
To attach the high pressure hose to the reel:
• Attach one end of the high pressure hose to a hose retaining clip on the hose reel.
• Wind the hose onto the reel by turning the reel handle clockwise.
• Attach the other end of the high pressure hose to a hose retaining clip to secure the hose in
place.
See Figure 9.
See Figure 10.
Hose retaining clip
15
Mounting post
Key hole
Fig. 9
Fig. 10