Advertisement
DO NOT use the drill for a task it is not designed to perform.
8
DO NOT allow untrained persons to operate the drill.
8
DO NOT get the drill wet or use in damp or wet locations or areas where there is condensation.
8
DO NOT operate the drill if damaged or parts are missing.
8
DO NOT use drill in an area where paint fumes, solvents or flammable liquids pose a potential hazard. Keep flammable material away
8
from the drill when operating. Flammable waste, such as wiping or cleaning rags, must be placed in a closed metal container and
disposed of correctly.
DO NOT exceed the rated capacity of the drill.
8
DO NOT leave the drill operating unattended.
8
DO NOT operate the drill when you are tired, under the influence of alcohol, drugs or intoxicating medication.
8
When not in use switch off the drill, remove plug from the power supply and do not leave until the drill has come to a complete stop.
9
2. INTRODUCTION
A comprehensive range of bench pillar drills to suit light industrial, agricultural and woodworking applications. Safety devices fitted include a
no-voltage release switch, allowing insurance company approval for use in educational establishments. All models have Morse taper spindle
housings for accepting taper shank drill bits. Each model offers multiple speed drives and access to drive belts is denied during operation by
mechanical protection. All drills are fitted with rack and pinion feed shafts with preset depth control for repetitive work. Mortise attachment
Model MA10 is available for Model No's GDM50B – GDM150B
3. SPECIFICATION
Model No: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GDM50B.V2 . . . . . . . . . . . GDM92B. . . . . . . . . . . . . . . .GDM120B
Drilling Capacity (Chuck Size):. . . . . . . . . . . . . . . . . 16mm . . . . . . . . . . . . . . . . 16mm . . . . . . . . . . . . . . . . . . . . . 16mm
Spindle Nose Taper: . . . . . . . . . . . . . . . . . . . . . . . . . MT2 . . . . . . . . . . . . . . . . . . MT2. . . . . . . . . . . . . . . . . . . . . . . . .MT2
Spindle Centre to Column: . . . . . . . . . . . . . . . . . . . . 127mm. . . . . . . . . . . . . . . . 127mm . . . . . . . . . . . . . . . . . . . 165mm
Spindle Travel: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60mm. . . . . . . . . . . . . . . . . 60mm . . . . . . . . . . . . . . . . . . . . . 80mm
Number of Speeds: . . . . . . . . . . . . . . . . . . . . . . . . . 5. . . . . . . . . . . . . . . . . . . . . 12 . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Speed Range: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 460-2890rpm . . . . . . . . . . . 210-2580rpm . . . . . . . . . 210-3340rpm
Maximum Distance Spindle to Table: . . . . . . . . . . . . 300mm . . . . . . . . . . . . . . . 390mm . . . . . . . . . . . . . . . . . . . 410mm
Maximum Distance Spindle to Base: . . . . . . . . . . . . 450mm. . . . . . . . . . . . . . . . 540mm . . . . . . . . . . . . . . . . . . . 600mm
Working Table Surface Size: . . . . . . . . . . . . . . . . . . Ø248mm . . . . . . . . . . . . . . Ø248 . . . . . . . . . . . . . . . . . . . . . . . Ø310
Working Base Surface Size: . . . . . . . . . . . . . . . . . . 160 x 180mm. . . . . . . . . . . 160 x 180mm . . . . . . . . . 210 x 190mm
Overall Base Size: . . . . . . . . . . . . . . . . . . . . . . . . . . 345 x 215mm. . . . . . . . . . . 345 x 215mm . . . . . . . . . 520 x 320mm
Column Diameter: . . . . . . . . . . . . . . . . . . . . . . . . . . 60mm. . . . . . . . . . . . . . . . . 60mm . . . . . . . . . . . . . . . . . . . . . 70mm
Collar Diameter: . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55mm. . . . . . . . . . . . . . . . . 60mm . . . . . . . . . . . . . . . . . . . . . 60mm
Overall Height: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 750mm. . . . . . . . . . . . . . . . 840mm . . . . . . . . . . . . . . . . . . . 960mm
Motor Power (Start): . . . . . . . . . . . . . . . . . . . . . . . . . 220W (370W) . . . . . . . . . . 220W (370W) . . . . . . . . . 350W (550W)
Supply: 230V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 230V . . . . . . . . . . . . . . . . . 230V . . . . . . . . . . . . . . . . . . . . . . . 230V
Duty Cycle: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . S2 . . . . . . . . . . . . . . . . . . . S2 . . . . . . . . . . . . . . . . . . . . . . . . . . . S2
Optional Keyless Chuck 16mm: . . . . . . . . . . . . . . . . GDMX/KC . . . . . . . . . . . . . GDMX/KC . . . . . . . . . . . . . . . GDMX/KC
Swing: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 254mm. . . . . . . . . . . . . . . . 254mm . . . . . . . . . . . . . . . . . . . 330mm
Model No: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GDM150B.V2 . . . . . . . . . . GDM180B.V2
Drilling Capacity (Chuck Size):. . . . . . . . . . . . . . . . . 16mm. . . . . . . . . . . . . . . . . 16mm
Spindle Nose Taper: . . . . . . . . . . . . . . . . . . . . . . . . . MT2 . . . . . . . . . . . . . . . . . . MT2
Spindle Centre to Column: . . . . . . . . . . . . . . . . . . . . 178mm. . . . . . . . . . . . . . . . 216mm
Spindle Travel: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80mm. . . . . . . . . . . . . . . . . 80mm
Number of Speeds: . . . . . . . . . . . . . . . . . . . . . . . . . 16. . . . . . . . . . . . . . . . . . . . 16
Speed Range: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120-3000rpm . . . . . . . . . . . 120-3000rpm
Maximum Distance Spindle to Table: . . . . . . . . . . . . 480mm. . . . . . . . . . . . . . . . 495mm
Maximum Distance Spindle to Base: . . . . . . . . . . . . 670mm. . . . . . . . . . . . . . . . 685mm
Working Table Surface Size: . . . . . . . . . . . . . . . . . . Ø310mm . . . . . . . . . . . . . . Ø355mm
Working Base Surface Size: . . . . . . . . . . . . . . . . . . 200 x 220mm. . . . . . . . . . . 240 x 280mm
Overall Base Size: . . . . . . . . . . . . . . . . . . . . . . . . . . 460 x 275mm. . . . . . . . . . . 520 x 320mm
Column Diameter: . . . . . . . . . . . . . . . . . . . . . . . . . . 80mm. . . . . . . . . . . . . . . . . 80mm
Collar Diameter: . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60mm. . . . . . . . . . . . . . . . . 75mm
Overall Height: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1070mm. . . . . . . . . . . . . . . 1085mm
Motor Power (Start): . . . . . . . . . . . . . . . . . . . . . . . . . 450W (650W) . . . . . . . . . . 550W (750W)
Supply: 230V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 230V . . . . . . . . . . . . . . . . . 230V
Duty Cycle: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . S2 . . . . . . . . . . . . . . . . . . . S2
Optional Keyless Chuck 16mm: . . . . . . . . . . . . . . . . GDMX/KC . . . . . . . . . . . . . n/a
Swing: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 356mm. . . . . . . . . . . . . . . . 432mm
4. CONTENTS
4.1.
PACKAGE CONTENTS Unpack the parts listed below and check to ensure they are in good condition. Any queries must be
reported to your stockist immediately.
Head Assembly
Column with Flange
Adjusting Handle with Set Screw (table)
Pivoted Clamp Bolts (2 - table arm & bracket)
Arbor
Wedge
Original Language Version
© Jack Sealey Limited
Base
Chuck and Key
Feed Handle and knobs
Table Arm, Bracket & Worm
Table
Rack and Rack Ring
Bolts and Washers (4)
Safety Guard
Set Screws (2)
Hex. Keys (2)
GDM Series 50B.V2, 92B, 120B.V2, 150B.V2, 180B.V2 ....Issue1
22/06/21
Advertisement
