Assembling / Removing the pedestal
Assembly screw (4)
(silver)
Assembly screw (4)
(black)
Assembling the pedestal
1
Adjusting the panel to your desired angle
Do not place any objects within the full rotation range.
Removing the pedestal from the TV
Be sure to remove the pedestal in the following way when using the wall-hanging bracket or repacking the TV.
1 Remove the assembly screws
2 Pull out the cover.
3 Lift the TV from the pedestal.
4 Remove the assembly screws
6
M5 × 18
M4 × 10
A
C
D
2
(View from the top)
from the cover.
from the bracket.
Bracket
Base
Secure the base as shown below to prevent the TV
from falling over.
The place where the base is secured should be thick
15°
enough and made of hard material.
15°
Cover
Commercially available screw
(not supplied)
Diameter: 3 mm
Length: 25 - 30 mm
3
E
B